Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Naperville: What to Know First
We provide independent Olympia Chimney chimney repair in Naperville with a written price before any work starts and a documented photo record when we’re done. Most Olympia Chimney repairs in Naperville are completed within one to two visits after our Level 2 camera inspection, and we stock common Olympia Chimney parts through our Haven buying network to avoid ordering delays. We’re not affiliated with Olympia Chimney - we’re an independent service provider who knows their product lines from hands-on work in Naperville homes, including the older stock near the Riverwalk corridor where freeze-thaw cycles hit hardest. If you own an Olympia Chimney liner, cap, or crown assembly and you’re seeing water intrusion, brick spalling, or draft issues, call us at (331) 265-1700. We’ll send a written scope and price before anyone picks up a trowel.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney ProFlex liner series: The ProFlex’s corrugated 316Ti stainless flex liner can develop stress fractures at the collar joint where it meets the thimble, especially in Naperville’s clay-heavy soils that shift through freeze-thaw. We cut back to sound metal, install a new ProFlex-compatible collar or a DuraFlex transition if the owner prefers, and pressure-test before we sign off. Corrine Halstead flagged three of these last winter near Ogden Avenue where the collar had cracked clean through but the liner body was still sound - the camera found it, not a flashlight.
- Olympia Chimney Gelco cap assemblies: The mesh on Gelco-branded caps sold through Olympia Chimney’s distribution channel tends to clog with cottonwood seed and fine debris from Naperville’s mature canopy, then corrode from the inside out when acidic condensation gets trapped. We remove the cap, document mesh integrity with photos, and either clean and re-screen with stainless mesh or source a replacement through our Famco supply line if the frame is compromised.
- Olympia Chimney poured-in-place liners (older installations): Pre-2015 Olympia Chimney refractory jobs in Naperville often show vertical cracking where the pour missed a void behind the smoke chamber. The symptom is flue gas odor in the attic or upper floor, not always visible damage from below. We run the camera to map the crack pattern, then either recommend a HeatShield cerfractory sleeve if the structure is sound, or a full stainless reline with DuraFlex if the wythe is compromised.
- Olympia Chimney crown wash (mortar-crown hybrid): Olympia Chimney’s spec crown is a sloped mortar wash over a concrete base, and in Naperville’s climate it fails from the top down - water enters hairline cracks, freezes, and pops the surface in 2-3 mm flakes we call spalling. We grind to solid substrate, apply a Gelco CrownCoat or pour a new concrete crown with proper overhang and drip edge, depending on what the photo record shows.
- Olympia Chimney flashing kits: The step-flashing pieces in Olympia Chimney’s standard kit are galvanized, not stainless, and we’ve found them rusted through at the roofline on Naperville homes built during the 2012-2018 construction wave. We fabricate custom copper or stainless step flashing on site, integrate it with the existing cricket or saddle, and seal with a high-temp polyurethane - no more water running down the face brick.
Our Olympia Chimney Chimney Repair Process
- 1
Call and schedule: A live person answers, 24/7. We book a Level 2 inspection slot - not a repair visit yet. The camera doesn’t guess. Neither do we.
- 2
NFPA 211 Level 2 inspection on arrival: Our tech runs a camera the full length of the flue, photographs the crown, cap, flashing, and exterior brick condition. Corrine reviews every photo set before we write the scope.
- 3
Written price, written scope, written warranty: Haven Standard Clause 1 - we deliver all three before work starts. If the job needs Olympia Chimney OEM parts, we quote that; if a DuraFlex or HeatShield equivalent is compatible and saves money without voiding any existing warranty, we explain the trade-off in writing.
- 4
Repair with documented stages: Tech photographs before, during, and after - mortar joints ground out, new brick laid, liner section replaced. The customer sees what we saw.
- 5
Post-repair camera verification and smoke test: We re-run the camera to confirm liner integrity, then pressure-test or smoke-test per the repair type. No verbal “looks good” - the photo record shows it.
- 6
Cleanup, final documentation, and 365-Day Done Right Promise: Haven Standard Clause 4 requires the completed photo record. Clause 5 is the promise - if it’s not done right, we make it right.
Before
AfterWhat Olympia Chimney Chimney Repair Costs in Naperville
| Repair Type | Typical Range in Naperville | What Moves the Price |
|---|---|---|
| ProFlex collar replacement / joint repair | $340 - $580 | Accessibility of thimble, liner length to access point |
| Gelco cap clean, re-screen, or replacement | $180 - $420 | Chimney height, mesh specification, frame reuse |
| Crown wash grind and recoat (Gelco CrownCoat) | $480 - $780 | Crown diameter, degree of spalling, need for base repair |
| Flashing repair / custom fabrication | $520 - $960 | Roof pitch, cricket complexity, material (galvanized vs. copper) |
| Brick repointing / spalling repair (per face) | $680 - $1,400 | Scaffold needs, brick matching, mortar analysis |
| Partial rebuild (above roofline) | $2,400 - $4,800 | Linear feet, liner extraction and reinstallation, cap integration |
These are the prices we actually write in Naperville - not national averages, not bait-and-switch ranges. Every estimate is free, and we offer a free second opinion on any competitor’s written quote. Call (331) 265-1700 for your exact scope.
Why Naperville Homeowners Call Level Two Chimney Naperville for Olympia Chimney Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a meaningful subset of those were Olympia Chimney installations in Naperville and the western suburbs. Our techs know the ProFlex collar issue by sight, the Gelco mesh clogging pattern by season, and the pre-2015 refractory pour failures by neighborhood age. When Olympia Chimney OEM parts make sense, we source them through our Haven buying network; when DuraFlex, HeatShield, or Famco components are the better call, we explain why in writing and let the owner decide. Background-checked, uniformed technicians. License number on the page. A text when we’re on the way. And every job backed by the 365-Day Done Right Promise - stamped, not implied.
FAQs
Using non-OEM parts can void remaining warranty coverage on the liner itself, which is why we identify warranty status during inspection and present OEM and compatible options in writing before you choose. If your ProFlex or other Olympia Chimney component is still under warranty, we’ll note that in the scope and source OEM parts through our network. Call (331) 265-1700 and we’ll check your installation date and warranty terms during the free estimate.
Common ProFlex collars, Gelco caps, and standard flashing components are stocked through our Haven buying network and usually available within 48 hours; specialty or discontinued Olympia Chimney parts may take 5-10 business days. We don’t start work until parts are in hand - no half-finished jobs waiting on backorders. Call (331) 265-1700 and we’ll confirm availability for your specific model before we book the repair.
Replace when the liner is fractured in multiple runs, the wythe is compromised, or repair costs exceed 60% of a new system installed; repair when the failure is isolated to a collar, cap, crown, or flashing and the structural shell is sound. Our camera inspection shows you exactly which condition you’re in, with photos you can see yourself. No replacement is recommended without camera evidence - call (331) 265-1700 for the inspection and a written comparison of both options.
NFPA 211 calls for annual inspection of all chimney systems, and in Naperville’s freeze-thaw climate with heavy clay soil movement, we agree - especially for ProFlex flex liners and mortar-crown hybrids that stress at joints. If you’re burning wood regularly, a Level 2 inspection with camera documentation every year catches collar cracks and crown spalling before water enters the system. Call (331) 265-1700 to schedule; estimates are free.
Skipped repairs on a compromised Olympia Chimney liner or crown allow flue gases, including carbon monoxide, to leak into wall cavities or living spaces; deteriorated flashing channels water directly into roof decking and ceiling drywall. The risk is real and specific, not theoretical - we’ve documented CO readings in attics from cracked ProFlex collars and replaced rotted roof sheathing from failed Gelco cap drainage. Call (331) 265-1700 for a free inspection and written scope before burning season.
Written by Corrine Halstead, Owner, Level Two Chimney Naperville at Level Two Chimney Naperville, serving Naperville and nearby areas.